Who Handles Sprinkler Repair and Installation?
Lake Oswego homeowners and businesses call Grover’s Landscape Services & Design for sprinkler repair, new system installation, and fall winterization. Family-owned since 1995, our licensed crew (Oregon CCB #100592) handles everything from a single broken head to a full new system, sized for Lake Oswego’s sloped lots, clay soil, and the city’s mandatory annual backflow testing.
By Yuriy Cheshev, Owner · Last updated 13 July 2026
What Do Sprinkler Services Include in Lake Oswego?
Sprinkler services cover everything that keeps an irrigation system watering correctly and legally: new installation, repair of heads and valves, drip conversion for beds, annual backflow testing, and seasonal winterization and spring startup. For Lake Oswego properties specifically, that list has two additions most cities don’t require in the same way — slope-aware zoning and a hard backflow testing deadline set by the city itself.
Our irrigation and sprinkler services cover new installs, drip irrigation for garden beds, controller and smart-Wi-Fi upgrades, and repair on Rain Bird, Hunter, Toro, and Netafim components — most brands installed anywhere in the Portland metro over the last thirty years. When we’re on-site for a repair, our maintenance crews often flag a sprinkler issue during a routine landscape maintenance visit before the homeowner notices the water bill.
What Are the Warning Signs Your Lake Oswego Sprinkler System Needs Repair?
Sloped lots change how a sprinkler problem shows up. On a flat yard, a bad zone just looks dry or soggy. On the hillside lots common in Uplands, Lake Grove, and the streets above Oswego Lake, a failing check valve lets water drain out the lowest head on the line after the zone shuts off, so the bottom of the slope stays soggy while the top goes brown — a pattern homeowners often misread as a watering-schedule problem instead of a hardware one.
Clay soil adds a second wrinkle: it absorbs water slowly, so a zone that looks fine during the run can still be pooling or running off ten minutes after the system shuts down. And on First Addition and Old Town properties with systems original to 1960s–1990s construction, aging risers and outdated valves often fail quietly for months before a head stops rising at all. If your system is more than 15–20 years old and you’ve never had a full zone-by-zone audit, that’s usually where we start.
What Does New Sprinkler Installation Involve in Lake Oswego?
New construction and full remodels in Lake Oswego — including the newer builds going up in Mountain Park and Uplands — are the easiest time to get zoning right, because we can lay out heads and valves before sod goes down instead of retrofitting around an existing lawn. For HOA-managed common areas, which Mountain Park has a lot of, we also handle multi-zone commercial-grade systems with centralized smart controllers so property managers can monitor water use across shared grounds from one dashboard.
Most upgrades we install are Hunter Hydrawise or Rain Bird LNK smart controllers, high-efficiency nozzles on older spray heads, and drip conversions for foundation beds — changes that typically pay for themselves in water savings within a couple of years on a standard Lake Oswego residential lot.
What Is Lake Oswego’s Backflow Testing Deadline, and Why Does It Matter?
This is the piece of sprinkler service that’s specific to where you live, not just what you own. The City of Lake Oswego’s cross-connection control program requires every irrigation system’s backflow assembly to be tested annually, with the completed report submitted to the city no later than July 15. It’s a state drinking-water requirement the city enforces directly, not a suggestion — cross-connection contamination is the leading cause of waterborne disease in public water systems, which is why Oregon takes it seriously.
We test, repair, and replace backflow assemblies as part of routine sprinkler service, and where required, we file the paperwork with the city so it doesn’t fall on you to track down a certified tester before the deadline.
How Often Should Sprinklers Be Serviced in Oregon?
Sprinklers should be serviced twice a year at minimum: a fall winterization and a spring startup, plus a mid-summer check if you’re running the system hard through July and August. In the Portland metro, including Lake Oswego, winterization runs late October through mid-November — before the first hard freeze splits heads, valves, and any pipe still holding water. Spring startup follows mid-March through early April, which is also the right time to catch whatever the winter damaged before the lawn shows it.
Winterizing means shutting off the water supply and blowing every zone out with compressed air, including the backflow assembly and any above-ground components. Skipping it on a Lake Oswego property with an older system is one of the more expensive mistakes we get called out for every spring.
Lake Oswego Neighborhoods and Properties We Serve
Three decades in the Portland metro has put our trucks in most of Lake Oswego’s neighborhoods, from lakefront lots to inland subdivisions:
- First Addition and Old Town, including the historic core near downtown
- Lake Grove and Waluga, along the west side of the city
- Westlake, Rosewood, and Palisades on the north and west edges
- Uplands and Mountain Park, including new construction and HOA common areas
- Blue Heron and Bryant on the south side of Oswego Lake
We also serve the surrounding metro, including West Linn, Tualatin, and Beaverton. For the rest of what we handle at your property beyond irrigation, see our full Lake Oswego services page.
Frequently Asked Questions
What do sprinkler services include?
New system installation, repair of heads, valves, and pipe, drip irrigation for beds, controller upgrades, backflow testing, and seasonal winterization and spring startup. Most calls are a single repair visit; new installs and full-property audits get scheduled separately.
How much does sprinkler repair cost in Lake Oswego?
It depends on what’s actually failing. A single head replacement often runs under a couple hundred dollars including labor. Valve repairs, broken pipe under hardscape, and controller replacement cost more. We diagnose on-site and put the price in writing before any work starts — no verbal estimates.
When should sprinklers be winterized in Oregon?
Late October through mid-November, before the first hard freeze. Waiting longer risks split heads, cracked valves, and damaged backflow assemblies once temperatures drop. Spring startup follows in mid-March through early April.
Do you install and repair sprinkler heads?
Yes. Head replacement is one of the most common calls we get, whether it’s a single broken head or a full-zone retrofit with high-efficiency nozzles. We also handle valve, pipe, and controller repairs on the same visit when needed.
Do you offer seasonal sprinkler tune-ups?
Yes. Spring startup and fall winterization are both routine visits — we pressurize and check every zone in spring, and blow out the system and protect the backflow assembly in fall. Many Lake Oswego clients schedule both automatically each year so they don’t have to remember.
Ready to Fix That Lake Oswego Sprinkler System?
Whether it’s one dead zone on a hillside lot or a system that’s never been audited, the fastest way to get a straight answer is to call.
Grover’s Landscape Services & Design Serving Lake Oswego and the surrounding Portland metro Phone: (503) 936-8910 Hours: Monday–Friday, 8:00 a.m. – 5:00 p.m. Oregon CCB #100592
Book a Sprinkler Diagnostic · See Recent Lake Oswego Projects
